Home Heating Oil Delivery

Ordering your home heating oil in Peyia has never been easier. Call us directly and we’ll deliver direct to your doorstep!

Full Service Car Wash

With our service, you get a high-tech shine, which restores shine to your vehicle’s paint while increasing its gloss and water repellency

New range of EKO lubricants

Endowed with an advanced formulation, the new range of EKO lubricants contribute to the maximum performance

Free Internet - Hotspot (Wi-Fi)

Fast and easy, wireless internet access for high-speed web surfing and e-mail

Industrial Lubricants

The EKO range of industrial lubricants includes products intended for:

  • Industrial applications requiring extreme pressure EP additives.
  • Lubrication of gearboxes, including worm gear and hypoid gears in applications where operating temperature can reach up to 90 degrees.
  • Applications of hydraulic and circulation systems.
  • Heat transfer with outstanding performance in many applications.
  • Processing of natural or synthetic rubber.

EKO Circolub

EKO CIRCOLUB products are high Viscosity Index, stable paraffinic oils naturally resistant to oxidation. The EKO CIRCOLUB grades differ in viscosity only.

ISO Viscosity grades available: 32, 68, 100, 150, 220, 320, 460.

APPLICATION

EKO CIRCOLUB product range, is suitable for circulating oil systems, including lubrication of large journal bearings, and for many industrial hydraulic applications where anti-wear additives are not required. Also suitable for once-through lubrication systems and for bearings, as well as for many industrial gears not requiring heavy-duty oils.

BENEFITS

  • High Viscosity Index ensures excellent viscosity characteristics over a wide temperature range.
  • Good natural resistance to oxidation in the conditions to which it is normally exposed.
  • Superior demulsibility .
  • Wide choice of viscosity grades available.
TYPICAL INSPECTION
Viscosity grades 3268100150220320460
Density, kgr/lt @ 15 °C0,8710,8830,8850,8920,8960,8990,903
Viscosity, cSt @ 40 °C3268100150220320460
Pour point,°C (max)-12-12-12-12-12-12-12
Flash point,°C(min)204216224236248266288
Viscocity Index,(VI) (min)90909090909090

PERFORMANCE   LEVEL

It meets or exceeds: DIN 51506 VBL, DIN 51517 C, DIN 51501 AN, ISO 6743 AN.

EKO Gearlub

EKO GEARLUB gear oils are superior-quality, extreme-pressure lubricating oils for enclosed gears and bearings operated under heavily loaded or shock-load conditions. EKO GEARLUB oils are formulated with sulphur-phosphorus, EP additives in solvent-refined base oils to permit operation at high temperatures with minimum wear and without encountering additive deterioration or deposit formation. The use of carefully balanced base oil/additive combinations gives these oils excellent oxidation and thermal stability properties, thereby ensuring long service life. The excellent water-separation properties ensure rapid removal of water in wet applications. 

APPLICATION

EKO GEARLUB oils are suitable for use wherever industrial EP gear oils are required, and are particularly advantageous where operating temperatures are high.

EKO GEARLUB oils are ideal for heavily loaded gear sets, including worm and industrial hypoid units, and for gears which are subject to shock loading.

All grades are suitable for circulating lubrication systems, although the lower viscosity grades are more commonly preferred for such applications.

TYPICAL INSPECTION
68100150220320460
AGMA Number2EP3EP4EP5EP6EP7EP
Viscosity, cSt@ 40°C68100150220320460
Viscosity Index (VI)909090909090
Pour point, °C-21-21-18-18-15-9
Flash point, °C , COC185200200200200200

PERFORMANCE LEVEL

DIN 51517 part 3 CLP, ISO 12925 type CKD, AGMA EP

Approved by David Brown Gear Industries.

Quality level: Flender, Cincinnati Milacron.

BENEFITS

  • Formulated for continuous service at temperatures as high as 90°C.
  • Formulated with high-quality, solvent-refined paraffinic base oils for long life with little viscosity increase or sludge formation.
  • Sulphur-phoshorus, extreme-pressure (EP) additive gives excellent stability, high load-carrying ability and low wear.
  • Good rust and corrosion protection with iron, copper and bronze alloys.
  • Excellent foam and water-separation properties. Rapid removal of water in wet conditions.

EKO Hydrolub HLP

The EKO HYDROLUB HLP range, are premium-quality hydraulic oils with low pour points to ensure fluidity at low temperatures. They have a high Viscosity Index which limits the change of viscosity with change of temperature. Blended with selected base stocks, they contain anti-oxidant, anti-rust, anti-wear and anti-foam additives.

APPLICATION

The EKO HYDROLUB HLP range, has been developed for use in a wide variety of industrial hydraulics applications such as machine tools, presses, contractors ’ plant and many types of equipment which transmit power through a hydraulic medium. The anti-wear characteristics ensure extended pump life in all hydraulic systems.

The hydraulic oil viscosities of the EKO HYDROLUB HLP range have been selected so that the optimum viscosity can be used for any hydraulic system operating temperature.

<-46[/av_cell][av_cell col_style='' av_uid='av-usffb5']<-38[/av_cell][av_cell col_style='' av_uid='av-upcf61']-36[/av_cell][av_cell col_style='' av_uid='av-ukddy9']-33[/av_cell][av_cell col_style='' av_uid='av-uejqvt']-30[/av_cell][av_cell col_style='' av_uid='av-u7aepd']-30[/av_cell][av_cell col_style='' av_uid='av-tzlw89']-27[/av_cell][av_cell col_style='' av_uid='av-tt70i1']-21[/av_cell][av_cell col_style='' av_uid='av-trea95']-21[/av_cell][/av_row] [av_row row_style='' av_uid='av-ti3zj5'][av_cell col_style='' av_uid='av-tb47hl']Flash point °C (min)[/av_cell][av_cell col_style='' av_uid='av-t6r561']128[/av_cell][av_cell col_style='' av_uid='av-szh85l']161[/av_cell][av_cell col_style='' av_uid='av-st9uhl']170[/av_cell][av_cell col_style='' av_uid='av-soyfkx']194[/av_cell][av_cell col_style='' av_uid='av-sgxvgp']204[/av_cell][av_cell col_style='' av_uid='av-sdsqxl']212[/av_cell][av_cell col_style='' av_uid='av-s5jdop']218[/av_cell][av_cell col_style='' av_uid='av-s05wep']232[/av_cell][av_cell col_style='' av_uid='av-rwdnbd']252[/av_cell][/av_row] [av_row row_style='' av_uid='av-rr7xcx'][av_cell col_style='' av_uid='av-rj772h']Neutralisation Nr. mg KOH/gr[/av_cell][av_cell col_style='' av_uid='av-re741l']0,50[/av_cell][av_cell col_style='' av_uid='av-r5ea6h']0,50[/av_cell][av_cell col_style='' av_uid='av-r3iojd']0,50[/av_cell][av_cell col_style='' av_uid='av-qwbsbl']0.60[/av_cell][av_cell col_style='' av_uid='av-qncodl']0,55[/av_cell][av_cell col_style='' av_uid='av-qjjf0p']0,55[/av_cell][av_cell col_style='' av_uid='av-qg0knt']0,55[/av_cell][av_cell col_style='' av_uid='av-q64tk9']0,55[/av_cell][av_cell col_style='' av_uid='av-q3vi3d']0,55[/av_cell][/av_row] [/av_table] [av_textblock av_uid='av-ptkg2h']

PERFORMANCE LEVEL

EKO HYDROLUB HLP range meet the following specifications:

DIN 51524 part 2-HLP (ISO VG 32,46 , 68, 100).

VICKERS I-286-S / VICKERS M-2950-S ( ISO VG 32, 46, 68, 100) CINCINNATI MILACRON P-68 ( ISO VG 32), P-70 ( ISO VG 46), P69 ( ISO VG 69), HAGGLUNDS DENISON- HF- 0 ( ISO VG 32, 46, 68, 100 ), ISO 11158 type HM, AFNOR NF-E-48-603 HM (ISO VG 46).

CAUTION:

Mixing of EKO HYDROLUB HLP oils with Engine oils could create problems due to incompatibility.

[/av_textblock]

BENEFITS

  • High Viscosity Index provides excellent viscosity characteristics over a wide temperature range.
  • Appropriate viscosities for optimum operation.
  • Excellent oxidation resistance under the most severe working conditions.
  • Low pour points ensure fluidity at low temperatures.
  • Load-carrying and wear-resistant qualities protect pump and other moving parts.
  • Compatible with silver-plated pump components.
  • Good protection against rust in system.
  • Excellent anti-foaming and release of entrained air.
  • Compatibility with all common sealing materials used in hydraulic installations.
  • Excellent hydrolytic stability and filterability.

EKO Hydrolub HVLP

Premium-quality hydraulic oils with low pour points and a Viscosity Index of over 150 to allow operation over a wide temperature range. They contain anti-oxidant, anti-rust, anti-wear and anti-foam additives, and also a Viscosity Index Improver. 

APPLICATION

EKO HYDROLUB HVLP range was developed for use in a wide variety of industrial applications but, with its Viscosity Index of over 150, is specifically intended for operating over a wide temperature range, or for critical equipment where viscosity variation due to temperature fluctuations must be kept to a minimum.

TYPICAL INSPECTION
ISO Viscosity grade324668100
Density, kgr/lt @ 15 C0,8680,8730,8790,885
Viscosity, cSt @ 40C324668100
Viscosity Index(VI)150150150150
Pour point , °C-39-36-33-30
Flash point ,COC,°C190204204210

Meet the following specifications: DIN 51524 Part III HVLP, ISO 11158 type HV, VICKERS I – 286 – S (ISO viscosity grades 32, 46 & 68), VICKERS M-2950 – S (ISO viscosity grades 32, 46 & 68), HAEGGLUNDS DENISON HF-0, CINCINNATI P-68 (ISO V.G. 32), P-70 (ISO V.G. 46) , P-69 (ISO V.G. 68 ), AFNOR NF-E 48-690/1 NF-E 48-603PART 1-TYPE HV (ISO VG 32).

CAUTION:

Mixing of EKO HYDROLUB HVLP oils with Engine oils could create problems due to incompatibility.

BENEFITS

  • High Viscosity Index for operation over a wide temperature range.
  • Excellent oxidation resistance under the most severe working conditions.
  • Low pour points for low-temperature operation.
  • Load-carrying and anti-wear properties to protect pump and other moving parts.
  • Compatible with silver-plated pump components.
  • Good protection against rusting.
  • Excellent resistance to foaming and air entrainment.
  • Compatible with normal hydraulic sealing materials.
  • Excellent hydrolytic stability.

 

EKOTHERMAL 500

EKOTHERMAL heat transfer fluid is a premium solvent refined paraffinic product with exceptional inherent oxidation stability and resistance to thermal decomposition.

EKOTHERMAL should be used only in closed systems where bulk temperature does not exceed 316°C. It is used for most conventional applications because of its low volatility, good low temperature performance, low corrosivity, relatively low viscosity, and good heat transfer properties.

EKOTHERMAL can also be used in open systems as long as the bulk temperature does not exceed 185°C.

TYPICAL INSPECTION
KV 40°C, mm2s-131.2
KV 100°C, mm2s-15.5
Viscosity index112
Pour point, °C-9
Flash point COC, °C216
Neutralisation number, mg KOH/g0.01

EKOTRAC

Multipurpose Tractor Lubricant

EKOTRAC is a super premium, multipurpose tractor lubricant designed to reliably meet transmission and hydraulic fluid lubrication requirements. This product is the right choice to maximise efficiency and protection of agricultural and commercial tractors operating in a wide range of environments and conditions. It is particularly effective in reducing wet brake and Power Take-Off (PTO) chatter.

PERFORMANCE LEVEL:

JOHN DEERE J2OC, ALLISON C-4, API GL-4, CATERPILLAR TO-2, MASSEY FERGUSON M 1135 και 1141, ZF-TE-ML-03, NEW HOLLAND

TYPICAL INSPECTION
Viscosity, cSt @ 100°C9,4
VI (min)140
Pour Point, °C-36
Flash Point, COC, °C (min)200

EKO Process 845, 876

Paraffinic rubber process oils of the ASTM D-2226 type 104B, differing only in viscosity, volatility and gravity.

APPLICATION

EKO PROCESS are plasticiser oils for specialist rubber products such as butyl rubber, copolymers of ethylene and propylene ( EPR ) and terpolymers of ethylene, propylene and diene ( EPDM ).

BENEFITS

  • The best process oils for use with butyl, chlorobutyl and EPDM manufacture.
  • Speeds butyl rubber cure rate and improves tack.
  • Low – toxicity oils resulting in extra safety when handling.
  • Minimal reactivity with peroxide curing agents used in EPDM rubber.
  • Non staining, light-coloured extenders for EPDM rubbers.
  • Low volatility, giving better environmetal conditions.
TYPICAL INSPECTION
Type845876
Relative density at 15°C869875
Colour ASTM ( max )1,54
Flash point COC, °C ( min)204246
Kinematic viscosity at 40°C

at 100°C

30.5

5.3

110
Volatility, % 3hours at 162.7°C (max)0.60.3
Refractive index at 20°C1.47501.4890
Neutralisation value, mg KOH/g (max)0.050.05
Aniline point, °C ( min)105.5110
Pour point, °C (max)-9-6

New range of EKO lubricants

A Flow of Power

SAVE ON GAS — CHANGE YOUR OIL

With regular car oil changes, your vital engine parts stay well-coated and protected against excess heat and friction. When you skip oil changes, the oil begins to thicken, break down, and is consequently less effective, resulting in damage and engine wear.

Avoid costly engine repairs

When you don’t change your oil regularly, you could end up needing costly engine repairs or even an engine replacement. Don’t risk it – follow your vehicle’s manufacturer’s recommendations. It will save you a lot of time and expense in the long run, and in the short run, you’ll even save on gas, as a well-oiled car burns fuel more efficiently.